Home Page

WilhelmSK 1.15.0 - App Store




About WilhelmSK

WilhelmSK is a highly customizable display, monitoring and control dashboard for your boat. WilhelmSK can connect to a Signal K server like the Signal K Node Server or a Signal K gateway like the iKommunicate. It can also

WilhelmSK is a highly customizable display, monitoring and control dashboard for your boat.

WilhelmSK can connect to a Signal K server like the Signal K Node Server or a Signal K gateway like the iKommunicate.

It can also connect directly to some devices:
º NMEA 0183 over TCP or UDP. (from for example, Digital Yacht's Smart WLN10)
º Any modern Navico (Lowrance, Simnet or B&G) GoFree MFDs
º NMEA 2000 via Yacht Device's YDWG-02
º NMEA 2000 via Actisense W2k-1
º Victron Venus GX or CCGX
º Victron VRM
º Chetco SeaSmart Devices
º Chetco HelmSmart

RayMarine Auto Pilot Support (via node-server or the YDWG only)
º View or change current mode (Standby, Auto, Wind, Track)
º View current target heading or Wind direction
º Change target heading or Wind direction
º Acknowledge "Turn To Waypoint'

Active Captain:
º You can view Active Captain Points of Interest and review or comment on them.


Alarms and Notifications
º View list of current current alarms
º Acknowledge RayMarine "Turn To Waypoint' *
º Push notification support *
º Setup server side alarms *
º Set an anchor alarm with the push of a button *

Navionics Maps
If you already have the Navionics Boating application with an active subscription, you can now use the same Navionics charts in WilhelmSK. Ensure you are a registered user with Navionics and have a Username and Password. If you have not registered, go to the Navionics Boating App’s Main Menu, click on the top “Me” option and then click Login. In WilhelmSK click the login button on the bottom right of the map and enter your Navionics login information.

Features:
- Raymarine MFD: display and interact with a RayMarine MFD (discovered via Bonjour)
- Fusion stereo (control zone volumes, source input, play, pause etc.)
- Create a gauge for any value available via SignalK
- Sophisticated anchor alarm (requires node server and signalk-anchoralarm-plugin)
- Customize gauge display using SignalK meta.zones
- Customize gauge range, min/max, etc.
- Save custom gauges to node server or the cloud for use on other devices
- Wind Angle gauges can optionaly be rotated so that they always point ot the bow of the boat, regaurless of device positioning
- Place gauges by long pressing on a gauge and choosing a differnt one
- Make a gauge full screen by double tapping
- Multiple layout support. Create a differnt layout for Steaming, Sailing, Home Monitoring, etc.
- Customize the nuber of pages and their layout
- Manuall connection configuration synced accross devices via iCloud
- Automatic connection selection based on current ip (usefull when Bonjour is not available and you have multiple boats)
- Two themes, dark and light
- Animated gauge needles
- iPad Slideover and Split View support (Your gauge configuration can be customized for these views)
- Connections can be configured to be refreshed manually or at a specific time interval
- Design your own custom gauge templates
- Share your custom templates via Air Drop, eMail, Text, etc.
- Edit ApplyTV or other device layouts and templates remotely using your iPhone or iPad
- Most gauges can be configured to be digital or analog
- Enter the SignalK path and title for any gauge to show data not supported by default
- Displays AIS targets in the Map views
- Configure node server plugins inside of the app
- IP and RTSP camera display


* Some advanced features require signalk-server-node and special plugins installed. Setup Instructions at https://github.com/sbender9/wilhelmsk-node-server-setup

Sep 1, 2023
Version 1.15.0
1.15.0:
* Apple Map type, orientatio and zoom can be configured (mainly for AppleTV)
* Added suppport for rtsp and ip cameras to AppleTV
* Added ability to send pages and templates directly to other devices (you can send your iPad pages to an AppleTV)
* Addded auto paging setting to AppleTV
* Added theme selection to AppleTV
* Added the Electrical Overview and WavyTanks gauges to AppleTV
* Automatically reconnect when changing the current connection settings
* Venus/VRM
* Use the custom device name in paths if available
* Allow selection of specific portalIds to get data from VRM
* Added setting for track color
* Added settings for AWA vector, TWA vector, course vector, and route
* Show a messsage if the alarm-silencer plugin is not installed
* Added a "Blue" theme
* Default color for LED's now comes from the theme
* Anchor Alarm position and distance can be edited in map gauges
* Added new "Wavy Tank" gauge
* LED gauge colors can be configured
* Added new "Electrical Overview" gauge. (inspired by Victron)
* Added square LED gauges
* added a LED Bank gauge

* Fixed decimal digitis setting for Wind Gauges is ignored
* Fixed display of some gauges in the templates editor
* Fixed AppleTV crash when a font is not available
* Stability enhancement to code for editing layouts on other devices
* Fixed the whole screen not beeing used on AppleTV
* Hide the menu/tab bar when not in use on AppleTV
* Hide the page indicator on AppleTV
* Fixed crash in Layout Editor when there's no connection and a Web gauge
* Improved error message when push notifcation enable fails
* Fixed freshness indicators when connected directly to Venus/VRM
* Fixed crash when tapping on the map in Anchor Alarm
* Fixed crash from odd data in Active Captain
* Fixed crash with when there are invalid notifications
* Fixed issues with automatically detecting and switching to/from dark mode
* Fixes for analog gauges when running the iPad version on a mac

1.14.0:
* Added the ability to specify the colors for the LED gauge
* Use the iOS color picker when available
* Enhancements to Victron VRM/Venus OS path selection
* Added ability to enter an ip/jhost for the Raymarine MFD view
* Added ability to connect directly to an Antisense W2K-1
* Added ability to follow other vessels in the maps
* Added ability to switch relays, inverter mode, etc, via Victron VRM

* Fixes for displaying data from specific sources
* improved connections when the server supports meta deltas
* Updated NMEA2000 pgn definitions
* Fixed not discovering Victron GX devices newer than the CCGX
* Fixed Victron VRM connections failing
* Fixed Navionics crash when boat length is null
* Fixed not detecting server features properly with signal-server 2.x



Previous Versions

Here you can find the changelog of WilhelmSK since it was posted on our website on 2016-10-19 04:24:33. The latest version is 1.15.0 and it was updated on 2024-04-22 10:53:26. See below the changes in each version.

WilhelmSK version 1.15.0
Updated At: 2023-09-01
Changes: Sep 1, 2023 Version 1.15.0 1.15.0: * Apple Map type, orientatio and zoom can be configured (mainly for AppleTV) * Added suppport for rtsp and ip cameras to AppleTV * Added ability to send pages and templates directly to other devices (you can send your iPad pages to an AppleTV) * Addded auto paging setting to AppleTV * Added theme selection to AppleTV * Added the Electrical Overview and WavyTanks gauges to AppleTV * Automatically reconnect when changing the current connection settings * Venus/VRM * Use the custom device name in paths if available * Allow selection of specific portalIds to get data from VRM * Added setting for track color * Added settings for AWA vector, TWA vector, course vector, and route * Show a messsage if the alarm-silencer plugin is not installed * Added a "Blue" theme * Default color for LED's now comes from the theme * Anchor Alarm position and distance can be edited in map gauges * Added new "Wavy Tank" gauge * LED gauge colors can be configured * Added new "Electrical Overview" gauge. (inspired by Victron) * Added square LED gauges * added a LED Bank gauge * Fixed decimal digitis setting for Wind Gauges is ignored * Fixed display of some gauges in the templates editor * Fixed AppleTV crash when a font is not available * Stability enhancement to code for editing layouts on other devices * Fixed the whole screen not beeing used on AppleTV * Hide the menu/tab bar when not in use on AppleTV * Hide the page indicator on AppleTV * Fixed crash in Layout Editor when there's no connection and a Web gauge * Improved error message when push notifcation enable fails * Fixed freshness indicators when connected directly to Venus/VRM * Fixed crash when tapping on the map in Anchor Alarm * Fixed crash from odd data in Active Captain * Fixed crash with when there are invalid notifications * Fixed issues with automatically detecting and switching to/from dark mode * Fixes for analog gauges when running the iPad version on a mac 1.14.0: * Added the ability to specify the colors for the LED gauge * Use the iOS color picker when available * Enhancements to Victron VRM/Venus OS path selection * Added ability to enter an ip/jhost for the Raymarine MFD view * Added ability to connect directly to an Antisense W2K-1 * Added ability to follow other vessels in the maps * Added ability to switch relays, inverter mode, etc, via Victron VRM * Fixes for displaying data from specific sources * improved connections when the server supports meta deltas * Updated NMEA2000 pgn definitions * Fixed not discovering Victron GX devices newer than the CCGX * Fixed Victron VRM connections failing * Fixed Navionics crash when boat length is null * Fixed not detecting server features properly with signal-server 2.x
WilhelmSK version 1.14.0
Updated At: 2023-08-08
Changes: Aug 8, 2023 Version 1.14.0 * Added the ability to specify the colors for the LED gauge * Use the iOS color picker when available * Enhancements to Victron VRM/Venus OS path selection * Added ability to enter an ip/jhost for the Raymarine MFD view * Added ability to connect directly to an Antisense W2K-1 * Added ability to follow other vessels in the maps * Added ability to switch relays, inverter mode, etc, via Victron VRM * Fixes for displaying data from specific sources * improved connections when the server supports meta deltas * Updated NMEA2000 pgn definitions * Fixed not discovering Victron GX devices newer than the CCGX * Fixed Victron VRM connections failing * Fixed Navionics crash when boat length is null * Fixed not detecting server features properly with signal-server 2.x
WilhelmSK version 1.13.4
Updated At: 2021-03-17
Changes: Mar 17, 2021 Version 1.13.4 1.13.4: * Show tracks for other vessels using the tracks plugin * Add favorite connections which show at the top. (Long press on the connection in the sidebar menu) * Fixed meta data not getting to the Apple Watch * Fixed Volume gauge not working on the Apple Watch * Fixed font size issues with the multi switch * Get position from Victron GX devices * Show Navionics errors * Digital Yacht RAW support (direct connection to NavLink2, etc) * New Navionics MAPS SDK with SSO * Fixed Fusion control prev/next buttons disabled im some cases * Fixe switch bank labels not showing if title display is off * Make multi switch support non numerical values 1.13.3: * Fixed issues when creating new page templates via the "New Template" button * Fixed not loading meta data with old versions of the server 1.13.2: * Added support for Fusion Stereo AirPlay Source * Added new Generic Time 12 Hour gauge * Fustion Stereo: don't show disabled zones and sources * Added support for Local Push Notifications * Added AWA & GWA gauge * Fixed support for meta deltas * Fixed bad conversion to gallons * Fixed Fusion power button not showing in some cases * Make so the Achor Move button can be seen on a white backgroun * Fixed only two gauges per row in Today Widget * Fixed issues with Watch sometimes not working on iOS14/watchOS7 * Fixed Fusion volume control sized incorrectly on iOS 14 * Fixed "Charging Mode" gauge crash * Fixed Switch Banks blank on initial conection
WilhelmSK version 1.13.3
Updated At: 2021-02-13
Changes: Feb 13, 2021 Version 1.13.3 1.13.3: * Fixed issues when creating new page templates via the "New Template" button * Fixed not loading meta data with old versions of the server 1.13.2: * Added support for Fusion Stereo AirPlay Source * Added new Generic Time 12 Hour gauge * Fustion Stereo: don't show disabled zones and sources * Added support for Local Push Notifications * Added AWA & GWA gauge * Fixed support for meta deltas * Fixed bad conversion to gallons * Fixed Fusion power button not showing in some cases * Make so the Achor Move button can be seen on a white backgroun * Fixed only two gauges per row in Today Widget * Fixed issues with Watch sometimes not working on iOS14/watchOS7 * Fixed Fusion volume control sized incorrectly on iOS 14 * Fixed "Charging Mode" gauge crash * Fixed Switch Banks blank on initial conection
WilhelmSK version 1.13.2
Updated At: 2020-12-08
Changes: Dec 8, 2020 Version 1.13.2 * Added support for Fusion Stereo AirPlay Source * Added new Generic Time 12 Hour gauge * Fustion Stereo: don't show disabled zones and sources * Added support for Local Push Notifications * Added AWA & GWA gauge * Fixed support for meta deltas * Fixed bad conversion to gallons * Fixed Fusion power button not showing in some cases * Make so the Achor Move button can be seen on a white backgroun * Fixed only two gauges per row in Today Widget * Fixed issues with Watch sometimes not working on iOS14/watchOS7 * Fixed Fusion volume control sized incorrectly on iOS 14 * Fixed "Charging Mode" gauge crash * Fixed Switch Banks blank on initial conection
WilhelmSK version 1.13.1
Updated At: 2020-08-31
Changes: Aug 31, 2020 Version 1.13.1 * Fixed crash with gauge options on iOS 12.x * Performance/Battery improvements * Cleanup of GDW/GWA.GWS gauges From 1.30.0: * New circle gauge type * iPad and MacOS Gauge Options now shows the advanced options on the same screen * Added option to lock editing of the gauges * Remember the last viewed page * Added keyboard shortcuts for iOS * Added the ability to share Layouts * Added ability to save Layouts to the server * Added support for temperature sensors from Venus OS * Added touch bar buttons to change the theme (MacOS) * Made some digital gauges able to be analog * Added a zoom button in the advanced analog window * Added option to draw text gauges using zone colors * Added ability to adjust the zones on Analog gauges * Added ability to change fonts for the Battery Overview gauge * Fixed analog gauge drawing when resizing/editing * Fixed issues with viewing map objects on MacOS * Fixed gauge options opening or swipe gestures happening when using buttons and sliders * Fixed wiggly fusion volume slider * Fixed Venus not reconnecting after sleep or connection gets closed (MacOS) * Fixed switches crashing on the Apple Watch * Fixed changing "Label Decimal Digits" also changes "Value Offset" * Fixed share via email on MacOS * Fixed issues connecting when a stored token expires * Fixed the watch not working with the cloud
WilhelmSK version 1.13.0
Updated At: 2020-07-23
Changes: Jul 23, 2020 Version 1.13.0 * New circle gauge type * iPad and MacOS Gauge Options now shows the advanced options on the same screen * Added option to lock editing of the gauges * Remember the last viewed page * Added keyboard shortcuts for iOS * Added the ability to share Layouts * Added ability to save Layouts to the server * Added support for temperature sensors from Venus OS * Added touch bar buttons to change the theme (MacOS) * Made some digital gauges able to be analog * Added a zoom button in the advanced analog window * Added option to draw text gauges using zone colors * Added ability to adjust the zones on Analog gauges * Added ability to change fonts for the Battery Overview gauge * Fixed analog gauge drawing when resizing/editing * Fixed issues with viewing map objects on MacOS * Fixed gauge options opening or swipe gestures happening when using buttons and sliders * Fixed wiggly fusion volume slider * Fixed Venus not reconnecting after sleep or connection gets closed (MacOS) * Fixed switches crashing on the Apple Watch * Fixed changing "Label Decimal Digits" also changes "Value Offset" * Fixed share via email on MacOS * Fixed issues connecting when a stored token expires * Fixed the watch not working with the cloud
WilhelmSK version 1.12.1
Updated At: 2020-03-20
Changes: Mar 20, 2020 Version 1.12.1 * Added ability to configure dark/light mode for Apple Maps * Added ability to select the font for Digital gauges * Added ability to power on/off a Fusion stereo * Added TouchBar support on MacOS * Made page template editor full screen on Mac and iPad * Fixed the ability to edit layouts and templates on another device * Fixed Active Captain not showing on maps * Fixed values not being converted in the Volume gauge * Fixed the Generic kWh gauge not converting from Joules to kWh From 1.12.0: * Added the ability to auto connect based on the Network SSID * Added support for the new node server AutoPilot plugin * Added a 24V Voltage gauge * Added support for the signalk-server-shutdown plugin * Added ability change Ship, AIS and POI size and transparency on maps * Added support for iOS 13's Dark Mode * Added ability to select a Layout to switch to be used for a specific connection * Added ability to set the relay paths and titles for Venus relays * Added ability to switch Victron charger/inverter mode with direct connections * Reworked Connection Settings UI * Added support for Multiple connections at the same time * Added the ability to configure the number of decimal digits for the label on analog gauges * Added a new image gauge * Fixed issues with enabling push notifications on iOS 13 * Fixed Fusion control with direct connection to a YDGW-02 * Fixes for silencing alarms and tun to waypoint from Push Notifications * Show errors if push notification setup fails * Fixed display issues in Fusion gauge with a USB source * Fixed crash when a switch has no path set * Fixed connections not getting imported from shared settings * Fixed eventual crash/cpu overload with UDP connections * Fixed Navionics maps settings issues * Fixed crash when flipping a switch with multiple connections * Fixed Venus digital inputs not converted with direct connection * Fixed device discovery only working when the app is first started * Fixed VRM connections not working * Fixed switching Venus GX relays not working with direct connections * Fixed issues with discovered connections on the watch
WilhelmSK version 1.11.0
Updated At: 2019-09-01
Changes: Sep 1, 2019 Version 1.11.0 * Made Watch update rate configurable * Implemented tack buttons on autopilot control * Added new 2x2, 2x3 and 2x1x2 grid Watch gauges * Thermostat gauge paths are now configurable * Added support for Chetco dimmers * Added SeaSmart support * Added HelmSmart support * Added the ability to change the bluetooth device for Fusion stereos * Added ability to enable/disable alarms to stereo for Fusion * Added a new Red color theme * Added more debugging/logging for non Signalk sources: * Added support for the signalk-buddylist-plugin * Added support to display notes * Added the ability to clear notification * Show AIS basestations on the Maps * Added support for Victron Venus digital inputs * Added ability to show the device location on maps when not on the boat * Added a Switch w/ LED gauge * Made so Advanced Gauge Options shows the gauge with the same proportions * Made the Log/Tree viewer show multiple lines of text * Support more values for the state of switches (closed, high, yes, etc.) * Added a LED gauge * Added a MiltiSwitch to support switches with multiple values (works with Victron charger/inverter) * Fixed crash with some Venus/VRM installs * Fixed crash on selecting playback * Fixed Fusion unmute not working for N2K connections * Fixed issue with needles not getting draw when going back to Gauges * Fixed issue with needles not getting draw when going back to Gauges * Fixed Position gauge craswhing on the Watch * Fixed TWS not showing on AWA&TWA watch gauge * Fixed digital gauges font size when maximized * Fixed crash when there's an error importing a layout * Fixed notification silence and turn to waypoint on the watch From 1.10.1 * Added AWA & TWA Gauge * Map performance/battery usage improvements * Fix blank screen and broken cancel button in Active Captain login * Fix crash when first selecting Navionics Maps * Fixed history playback From 1.10.0: * Added direct device support for NMEA 2000 via Yacht Device's YDGW-02 * Added direct device support for Vicron Venus devices * Added auto detect for Digital Yacht's Smart WLN10 * Added auto detect for Navico (Lowrance, Simnet or B&G) GoFree MFDs * Added auto detect for Yacht Device's YDGW-02 sending on UDP port 2002 * Added control of NMEA 2000 Digital Switching devices * Added support for more NMEA 0183 sentences * Added support for NMEA 2000 over 0183 ($PCDIN sentence) * Added support for NMEA 0183 UDP connections * Fixed connecting to the iKommunicate over the cloud * Fixed crash with null/empty notifications * Fixed playback not working with latest node server * Fixed anchor warning radius circle not getting updated when changed
WilhelmSK version 1.0
Updated At: 2016-10-04


Related Apps

Here you can find apps that are similar with WilhelmSK.



Disclaimer

Official App Store Link


We do not host WilhelmSK on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.

The App Store link for WilhelmSK is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.

If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.

BarCode2D-PNG


Click stars to rate this APP!

Users Rating:  
  0.0/5     0
Downloads: 4
Updated At: 2024-04-22 10:53:26
Publisher: Scott Bender
Operating System: IOS
License Type: Free Trial